Advertisement
MSR 1288 series
Error Beep Sound
For enable / disable sound when MR reads card and error happened.
Prefix / Suffix
Enable or disable prefix / suffix for card data
When on the check box, you can edit the prefix / suffix, key in up to 7 characters.
You can key in data in text field directly, or use the mouse click the number and then enter the ASCII code.
Note:
The format of output data is:
[Prefix] [Track1 data] [Track2 data] [Track3 data] [Suffix]
[Track x data] = [Track x prefix] [Start sentinel] [card data] [End sentinel] [LRC sentinel] [Track x suffix]
[card data] = [ISO data field 1] [ISO data field 2] [ISO field 3] [CR] [LF]
Refer to MSR track 1/2/3 settings, and ISO format settings for the details.
High compatible TK1,TK2,TK3
For enable / disable high compatible mode for reading data from Track1/2/3
, to enable the option, the decoder will turn off some digit check for reading card data,
It will be more efficient to read bad cards which used for long time and damaged a little bit.
KB data output mode
To set Scan Code mode, and then card data will be sent to PC by scan code, it emulates the normal
keyboard code. To set ALT mode, card data will be sent by ASCII code mode.
4. MSR Track1 / Track 2 / Track 3 individual Setting
Double click the "MSR main settings", will show up another track1/track2/track3 settings,
Please choose one of them for setting.
17
User's Manual
Advertisement
