Related Manuals for JARLTECH 1260A
Summary of Contents for JARLTECH 1260A
- Page 1 ISO 9002 Certified Lead with technology 1260A Win customers with service Magnetic Stripe Reader OPERATION MANUAL...
- Page 2 Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Jarltech. Every effort has been made to ensure that the information in this manual is accurate. Jarltech is not responsible for printing or clerical errors.
- Page 3 1. Introduction 2. Installation 3. Custom Programming Tool Appendix I: Specifications...
- Page 4 Introduction 1260A is an advanced bi-directional, programmable magnetic stripe reader. Supports ISO standard format card . It is designed for use with credit authorization terminals, point-of-sale terminals, portable terminals, personal computers and banking terminals. Model 1260AK is designed to be used with IBM/AT compatible computer, entering data.
-
Page 5: Installation
JC-1260A KB series: The MD-6M side of KB cable, shall be connected to PC PS/2 Keyboard port, And then, connect RJ45 side to JC-1260A. The MD-6F side of KB cable can be connected to normal PC keyboard, PC keyboard can work with... - Page 6 JC-1260A RS232 series: The DB-9F side of RS232 cable connects to PC com port (com1 or com2 or other COMs) , RJ45 side connects to JC-1260A. and power connects to DC jack of DB-9F connector.
-
Page 7: Custom Programming Tool
2. Main interface sets If Auto detection was ok, then main screen shows the operating mode of 1260A that you are using. The image PIC-01 will be shown when 1260AK (keyboard mode) detected. Or, The main screen will be shown as PIC-02 when 1260AR (RS232 mode) detected. - Page 8 PIC-01 PIC-02...
- Page 9 PC. RS232 mode: Com port value is for JC-1260AR exists. Baud rate is for setting JC-1260AR RS232 communicates speed. Buzzer Sound: For enable / disable sounds of 1260A, please click the check box for setting. 3. MSR Setting...
- Page 10 Error Beep Sound For enable / disable sound when 1260A reads card and error happened. Prefix / Suffix Enable or disable prefix / suffix for card data When on the check box, you can edit the prefix / suffix, key in up to 7 characters.
- Page 11 Double click the “MSR main settings”, will show up another track1/track2/track3 settings, Please choose one of them to set settings. Error Beep Sound For enable / disable sound when 1260A reads card and error happen. Prefix / Suffix Enable or disable prefix / suffix for card data...
- Page 12 (Track 1 start sentinel is “% “, Track 2 / 3 start sentinel is “; “ ) End sentinel Enable / Disable track end sentinel (The end sentinel is “? “ for all tracks) LRC sentinel Enable / Disable track LRC sentinel (LRC = first byte data second byte data third byte data...
- Page 13 6. Load Main Setting From 1260 Choose for up loading settings from JC-1260 to PC, this function only can be active by RS232 cable. 7. Detect Firmware Version Choose for detect firmware version of current JC-1260, this function only can be active by RS232 cable.
- Page 14 Suffix (7 characters max.) • Field selection • Start and end sentinel • LRC selection • Inter-character delay • Inter-scan code delay • RS232 parameters (baud rate,) System Compatibilities • JC-1260A standard RS232C and Keyboard interface operates with IBM AT, PS/2 and Compatibles.
- Page 15 • Humidity: 10% ~ 90% RH (non-condensing) Power Requirement • Model JC-1260AK: from KB port. • Model JC-1260AR: from external power supply. Power Consumption • During operation: max 300 mA • While idle: 60 mA Copyright 2001 Jarltech International Inc.