JARLTECH JB-1300 Operation Manual page 13

Setp7 Related setting (See picture 3-5)
With RS232 output mode test:
Connect RJ-45 male cable to button reader, connect the other end
with DB9 male cable to COM port.
1. Select "Data read test" on the page 2
2. After touch the key, key's data will shown in the bottom window
3. Press "Clear" to clear container in the window.
With Keyboard output mode test:
Connect RJ-45 male cable to button reader, connect the other
end with Y- type keyboard to PC and QWERTY keyboard.
1. After touch the key, key's data will shown in the bottom window
2. Press "Clear" to close the test window.
picture 3-5
13