Points To Remember; Runtime Check - Python 872 Owner's Manual

Points to remember

If the hood is open or is the brake pedal is pressed, the vehicle will
not start using remote start. The remote starter shuts down:
▀
When the brake pedal is pressed
▀
The hood is opened
▀
If the alarm is triggered when armed.
▀
When the Remote Start command is sent again from a remote
control

Runtime Check

To check the amount of runtime remaining:
After the vehicle is remote started, press the
and then hold until the remote beeps, and then release. The LEDs light
up to indicate how much time is remaining.

100% runtime remaining
75% runtime remaining
50% runtime remaining
25% runtime remaining
When the remote
start and Function
LEDs are blinking,
there is less than
three minutes of
runtime left.
button three-times
© 2008 Directed Electronics—all rights reserved