Power Acoustik PTID-8940NRT Operating Manual page 16

14. REL
Press to flip down the front panel.
15. [EJECT]
When flip down the front panel, press to eject / load a disc.
16. [RESET]
Press to reset the unit.
17. [OUT] / 18. [IN]
Press the [OUT] / [IN] buttons to move the monitor forward / backward by singly step.
There are 4 steps to move the monitor forward / backward totally.
Under the NAVI mode, hold on pressing the [OUT] / [IN] buttons to decrease /
increase the brightness of panel.
19. [SYSTEM/NAVI]
Press to enter / exit the NAVI mode.
Hold on pressing to enter / exit the System Parameter Setup menu.
15