Av In Operations - Power Acoustik PTID-8001NT Operating Manual

AV IN OPERATIONS

Touch the icon "AV IN" to enter the AV IN Mode:
1. MUTE
Touch the icon to switch off the sound; touch it again to resume to the previous
volume level.
2. EQ
The user can set to adjust the audio output to your preference:
USER – POP – CLASSIC – ROCK – JAZZ – USER
3. MENU
Touch the icon to return the main menu.
4. EXIT
Touch the icon to exit the TOUCH ICONS display.
5. AV IN 1
Touch the icon to enter AV IN 2 mode:
NOTE:
1, AV IN 1 is for the RCA audio (L/R) & video input on rear panel of unit.
2, AV IN 2 is for the audio (L/R) & video input jack on the right side of front
panel (see item 11 in page 7). It is available to switch to AV IN 2 mode under AV
IN 1mode only. Connect an external audio/video device to AV IN 2 jack to listen
to the device through your car speakers.
- 29 -