Dvd Player Operations - Power Acoustik PTID-4003TV Owner's Manual

DVD PLAYER OPERATIONS

1, Press the [POWER/SOURCE] button to switch to DVD Mode if disc inside.
2, When disc loading, the unit will switch to DVD Mode automatically.
Inserting Disc
Press [EJECT] button, the front panel will slide down to
Position 1; then insert a disc into the Disc Loading Slot;
the panel will slide back automatically.
Ejecting Disc
Press [EJECT] button, the front panel will slide down to Position 1; then eject a disc;
the panel will slide back automatically after 30 seconds, if no action is taken.
NOTE:
The [EJECT] button on the remote control will perform the same functions.
Play/Pause
Press the [PLAY/PAUSE] button to play or pause the disc.
Stop
During movie playback, press the [STOP] button once; the DVD player memorizes
the location where you stopped (press PLAY button to resume playing from the
memorized location).
If you press the [STOP] button twice, the playback will start from the beginning of the
disc when you press again on the [PLAY] button.
F.FWD/F.REV
Press the [F.FWD] / [F.REV] buttons to select fast forward / reverse search. Press the
buttons on the remote control performs the same operation. Press the [PLAY/PAUSE]
button to resume to normal playback.
Previous/Next
Press the [Previous/Next] button to go to the pervious / next chapter, track or song.
Setup
Press the [SETUP] button to enter the setup menu.
Enter
In DVD mode, press the [ENTER] button to confirm the Setup Menu.
Direction
Press the direction buttons (UP / DOWN / LEFT / RIGHT arrow) to move the cursor
to the selected item.
Display
Press the [DISPLAY] button to display the current playback information on the
screen.
Zoom
Press the [Zoom] button during normal playback to zoom a picture. Press it
repeatedly to switch between the zoom levels.
- 20 -