Table of Contents
Advertisement
Cable Network Setup
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet
Protocol (IP) Settings are automatically configured.
Please check if the LAN cable is connected. (See page 50)
➣
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
Press the ▲ or ▼ button to select Cable Network Setup,
then press the ENTER button.
Press the ENTER button to select Internet Protocol Setup.
4
Press the ▲ or ▼ button to select Auto Setup, then press the
ENTER button.
The Internet Protocol is set automatically.
➣
Select Network Test to check the network connectivity.
➣
Press the EXIT button to exit.
Manual Setup
To connect the TV to the LAN using a static IP address, you must
set up the Internet Protocol (IP).
Please check if the LAN cable is connected. (See page 50)
➣
1
Press the ENTER button to select Internet Protocol Setup.
Press the ▲ or ▼ button to select Manual Setup, then press
the ENTER button.
Press the ▲, ▼, ◄ or ► button to move to an item, and press
the numeric button to configure the selected item. Press the
ENTER button.
Select Network Test to check the network connectivity.
➣
Press the EXIT button to exit.
Network Test
You can test or confirm the network connection status after setting
up the network.
1
Press the ▲ or ▼ button to select Network Test, then press
the ENTER button.
The current network settings will appear.
➣
Press the EXIT button to exit.
When unable to connect to a wired network
1. If your Internet service provider has registered the MAC address of the device used to connect to the
Internet for the first time and authenticates the MAC address each time you connect to the Internet,
your TV may not be able to connect to the Internet as the MAC address differs from that of the device
(PC) used to connect to the Internet the first time. In this case, ask your Internet service provider
about the procedures to connect devices other than your PC (such as your TV) to the Internet.
2. If your Internet service provider requires an ID or password to connect to the Internet (network), your
TV may not be able to connect to the Internet. In this case, you have to enter your ID or password
when connecting to the Internet using an Internet Sharer (Router).
3. The internet connection may fail due to a firewall problem. In this case, contact your Internet service
provider.
If you cannot connect to the Internet even if you have followed the procedures of your Internet service
provider, please contact a Samsung Electronics Service Center.
English - 5
T V
Setup
Plug & Play
Language
: English
Time
Cable Network Setup
Light Effect
: In Watching TV
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move
Enter
Cable Network Setup
Internet Protocol Setup :
Auto Setup
Manual Setup
Network Test
IP Address
:
0
0
Subnet Mask
:
0
0
Gateway
:
0
0
DNS Server
:
0
0
Move
Enter
Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address
:
0
0
Subnet Mask
:
0
0
Gateway
:
0
0
DNS Server
:
0
0
Move
Number
Enter
0~9
Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
IP Address
:
0
0
Subnet Mask
:
0
0
Gateway
:
0
0
DNS Server
:
0
0
Move
Enter
Return
0
0
0
0
0
0
0
0
Exit
0
0
0
0
0
0
0
0
Return
0
0
0
0
0
0
0
0
Return
Advertisement
Table of Contents
