Table of Contents
Advertisement
Storing Channels Automatically
You can scan for the frequency ranges available to you
(availability depends on your country).
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any
channels you do not wish to watch.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ENTER button to select Area.
4
Select your area by pressing the ▲ or ▼ button, then press the
ENTER button.
5
Press the ▲ or ▼ button to select Auto Store, then press the
ENTER button.
Press the ENTER button again to start the search.
The search will end automatically.
➢
To stop the search before it has finished, press the
RETURN or the ENTER button.
Storing Channels Manually
You can store television channels, including those received
via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
Press the ▲ or ▼ button to select Manual Store, then press the ENTER button.
4
Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
5
When you are satisfied with your setting, press the ENTER button.
Press the EXIT button to exit.
Programme (Programme number to be assigned to a channel)
− Press the ▲ or ▼ button until you find the correct number.
➢
You can also select the channel number directly by pressing the numeric buttons (0~9) on the
remote control.
Colour System: Auto/PAL/SECAM/NTSC 4.4/NTSC .5
− Press the ▲ or ▼ button to select the required colour standard.
Sound System: BG/DK/I/M
− Press the ▲ or ▼ button to select the required sound standard.
Channel (When you know the number of the channel to be stored)
− Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).
− Press the ► button, then press the ▲ or ▼ button to select the required number.
➢
You can also select the channel number directly by pressing the numeric buttons (0~9) on the
remote control.
➢
If there is abnormal sound or no sound, re-select the sound standard required.
Search (When you do not know the channel numbers)
− Press the ▲ or ▼ button to start the search.
− The tuner scans the frequency range until the first channel or the channel that you selected is
received on the screen.
Store (When you store the channel and associated programme number)
− Set to OK by pressing the ENTER button.
English - 1
T V
Channel
Area
: Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move
Enter
T V
Channel
Area
: Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move
Enter
T V
Channel
Area
: Asia/W.Europe
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune
Move
Enter
Continued...
Return
Return
Return
Advertisement
Table of Contents
