Plug & Play Feature - Samsung PS63A750T1R User Manual

Series 7
Table of Contents

Advertisement

Plug & Play Feature
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
The Screen Saver is activated if there is no operating signal for
longer than 15 minutes.
1
If the television is in standby mode, press the POWER button
on the remote control. The message Start Plug & Play. is
displayed. Press the ENTER button. Language menu is displayed.

Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER button. The
message Select 'Home Use' when installing this TV in your home. is displayed.
The Screen Saver is activated if there is no remote control key input for longer than 1 minute
while Plug & Play is running.

Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTER button. The
message Check antenna input is displayed.
 The default selection is Home Use.
 We recommend setting the TV to Home Use mode for the best picture in your home
environment.
 Store Demo mode is only intended for use in retail environments.
 If the unit is accidentally set to Store Demo mode and you want to return to Home Use
(Standard): Press the Volume button. When the volume OSD is displayed, press and hold
the MENU button for 5 seconds.
4
Make sure that the antenna is connected to the TV.
Press the ENTER button. Area menu is displayed.
5
Select your country or area by pressing the ▲ or ▼ button, then press the ENTER button. Auto
Store menu is displayed.

Press the ENTER button to start search the channels.
The channel search will start and end automatically. After all the available channels are stored,
Clock Set menu is automatically displayed.
To stop the search before it has finished, press the ENTER button with Stop selected.

Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm. Set these by pressing
the ▲ or ▼ button.
You can set the Month, Day, Year, Hour, and Minute directly by pressing the numeric buttons
on the remote control.

Press the ENTER button to confirm your setting. The message Enjoy your viewing is displayed.
When you have finished, press the ENTER button.
Even if the ENTER button is not pressed, the message will automatically disappear after several
seconds.
If you want to reset this feature ...
1
Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Setup, then press the
ENTER button.

Press the ENTER button again to select Plug & Play.
The message Start Plug & Play. is displayed.
English - 10
Plug & Play
Start Plug & Play.
OK
Enter
T V
Setup
Plug & Play
Language
: English
Time
Cable Network Setup
Light Effect
: In Watching TV 
Melody
: Off
Entertainment
: Off
Energy Saving
: Off
PIP
Move
Enter
Continued...
Exit

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps63a750

Table of Contents