Table of Contents
Advertisement
Setting the DLNA Network
DLNA allows you to watch videos and pictures saved on your PC on your TV through a network
connection in WISELINK Pro mode. This removes the need to copy them to a USB storage device and
then connect the device to your TV. To use DLNA, the TV must be connected to the network and the
DLNA application must be installed on your PC.
Network Connections Diagram
LAN Cable
1
1
Connect the LAN port on the rear panel of the TV to the external modem with a LAN Cable.
Connect the PC to which the DLNA PC Share Manager program will be installed and the external
modem using a LAN cable.
Connect the LAN port on the wall and the external modem with a Modem Cable.
Connecting to the Network
1
When connecting to the network is complete, set up the network on the TV (see page 50).
A Wireless Internet connection does not support DLNA.
➣
The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same
➣
(e.g. IP Address: 123.456.789.XX )
Run a Network Test to check the network settings.
TV Rear Panel
PC
English - 40
The Modem Port on the
External Modem
(ADSL/VDSL/Cable TV)
Modem Cable
LAN Cable
Wall
Advertisement
Table of Contents
