Drive Bay Locations - Lenovo THINKCENTRE 9120 Replacement Manual

Figure 11 shows the location of the drive bays.
Figure 11. Drive bay locations
The following list describes the types and size of drives that you can install in each
bay:
1 Bay 1 - Maximum height: 43.0 mm (1.7 in.)
2 Bay 2 - Maximum height: 43.0 mm (1.7 in.)
3 Bay 3 - Maximum height: 25.8 mm (1.0 in.)
4 Bay 4 - Maximum height: 25.8 mm (1.0 in.)
5 Bay 5 - Maximum height: 25.8 mm (1.0 in.)
* You can obtain a Universal Adapter Bracket, 5.25 to 3.5-inch from a local
computer retailer or by contacting the Customer Support Center.
Installing a drive in bay 1 or bay 2
This section provides instructions on how to install a drive in bay 1 or bay 2.
1. Remove the computer cover. See "Removing the cover" on page 11.
v Optical drive such as CD drive or DVD
drive (preinstalled in some models)
v 5.25-inch hard disk drive
v 3.5-inch hard disk drive (requires a
Universal Adapter Bracket, 5.25 to
3.5-inch)*
v Optical drive such as CD drive or DVD
drive
v 5.25-inch removable media drive
v 3.5-inch hard disk drive (requires a
Universal Adapter Bracket, 5.25 to
3.5-inch)*
3.5-inch diskette drive (some models
preinstalled)
3.5-inch SATA hard disk drive
(preinstalled)
3.5-inch SATA hard disk drive
Chapter 3. Installing options and replacing hardware
19