Samsung SV-665B Instruction Manual page 21

Auto Repeat Play
GB
You can set repeat play to repeat the tape continuously from
beginning to end.
BONUS
AUTO POWER OFF :OFF
1
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
2
❿
œ ❷ END: MENU
3
4
5
6
Interval Repeat Play
You can set interval repeat play to repeat the cassette several times
for special interval.
1
BONUS
2
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
3
4
❿
œ ❷ END: MENU
5
6
7
36
Press MENU on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
Press the corresponding ,
œ ❷
EASY OPERATION option.
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
Press the corresponding œ or ❷ buttons, until the
REPEAT PLAY option is selected.
Press ➛ or ❿, until...
To...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
On completion, press MENU twice to exit the menu.
Press MENU on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
Press the corresponding œ , ❷
EASY OPERATION option.
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
Press the corresponding or buttons, until the
œ ❷
NO. OF INTERVAL REPEAT option is selected.
Press ❿, until...
To...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play OFF is displayed.
On completion, press MENU twice to exit the menu.
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result: " " is displayed.
INTERVAL REPEAT SETTING
Press the INPUT/REPEAT button one more time at the desired
end point.
Result: The tape is automatically rewound to the start point.
" INTERVAL REPEAT " is displayed.
Using the Tape Counter
The tape counter:
N Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
N Is reset when a cassette is inserted in the VCR
N Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
N
Press DISP./ or DISPLAY twice to display the counter
N
Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
N
Start playback or Recording.
Press the I button.
N
N
To fast-froward or rewind to the sequence at which the
➛ ➛ ❿ ❿
counter was set to zero, press or .
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
N
Once to display the current function, programme
number, recording speed, date, time and counter
N Twice to display the counter only
N
Three times to display the time remaining on the
cassette
N
Four times to clear the display
GB
0:00:00
#
(SV-665B/SV-660B/
#
#
(SV-460B/SV-265B/
#
(SV-260B/SV-260X)
(SV-665X/SV-460X/
#
(SV-660X)
CLR/RST F.ADV INDEX CLR/RST F.ADV INDEX
-/--
SELECT
TV VCR INPUT A.TRK IPC INPUT
2 2
REPEAT REPEAT
AUDIO DISP./ UDIO DISPLAY
VOL PROG/TRK TRK PROG
2
2
REC MENU REC MENU
37