Samsung SV-665B Instruction Manual page 15

Using the G-CODE Feature # (SV-665B/665X/265B Only)
Before presetting your VCR:
GB
Up to six programmes can be preset.
SPEED DUB TV/VCR TIMER
1
1
2
3
** TIMER METHOD **
STANDARD
G-CODE
4
❿
END: MENU
œ ❷
G-CODE
CODE ---------
5
➛
CODE:0-9 CORRECT:
END:MENU
1/JAN MON 21:28
PROG
PR DAY START STOP
6
L1 MO 1 12:00 12:50SP
-- ---- --:-- --:----
7
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
-- ---- --:-- --:----
➛❿
œ ❷
DELETE:CLR/RST MENU
8
☛
™ G-CODE is a trademark of Gemstar Development Corporation. The G-CODE system is
manufactured under licence from Gemstar Development Corporation.
26
N Switch on both the television and your VCR
N Check that the date and time are correct
N Insert the cassette on which the programme is to be
recorded (safety tab intact)
Press the TIMER button.
Result: The is displayed.
TIMER METHOD
Press the corresponding œ or ❷ buttons, until the G-CODE option
is selected.
Press the ❿¤button to select
G-CODE .
Result: A message is displayed to allow you to enter the
G-CODE code.
☛
If all six programmes have been set, the message TIMER
IS FULL is displayed. Refer to page 29 if you wish to
cancel a preset recording.
Press the numeric buttons to enter the code opposite the pro-
gramme that you wish to record in your television magazine.
➢
If you wish to correct the G-CODE code that you are
entering:
N Press the ➛ button until the digit to be corrected is
cleared
N
Enter the correct digit
Press the MENU button.
Result: The information concerning the programme is displayed.
☛
When using the G-CODE function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the or buttons. Refer to the following page if:
œ ❷
N The programme number or times flash
N You wish to modify the programme
If the programme and times are correct, press the MENU button.
Press the VCR STANDBY/ON (STANDBY/ON) button to activate
the timer. V
Result: The Timer indicator ( ) is displayed.
☛
If no cassette has been inserted when you press
VCR STANDBY/ON (STANDBY/ON) the Timer indicator
flashes. If the safety tab on the cassette has been broken,
the cassette is ejected. Insert the appropriate cassette.
Refer to page 29 if you wish to:
N
Check that your VCR has been programmed correctly
N
Cancel a preset recording
The numbers next to each TV programme listing are
G-CODE code numbers, which allow you to programme
your videorecorder instantly with the remote control. Tap
in the G-CODE code for the programme you wish to
record.
Modifying G-CODE Programming # (SV-665B/665X/
SV-265B Only)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Select an input source other
than the tuner LINE IN 1 or LINE IN 2 input
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
#
(SV-640B only)
+
IPC
NICAM
Then...
Press the ➛ or ❿ buttons, until the
N
PR selection flashes.
N
Press the INPUT button one or more times to change the
input source selection.
➢
The input source must be selected before changing any
other value.
Press the ➛ or ❿ buttons, until the
N
DAY selection flashes.
N
Press the œ or ❷ buttons, until the DLY (Daily) value is
displayed.
N Press the ➛ or ❿ buttons, until the
DAY selection flashes.
N
Press the œ or ❷ buttons, until the W- (Week) value is
displayed, followed by the required day.
Example: W-SA (Weekly Saturday)
Press the ➛ or ❿ buttons, until the
N selection flashes.
STOP
N
Press the œ or ❷ buttons to increase or decrease the stop
time.
Press the ➛ or ❿ buttons, until the recording speed selection
N
flashes.
N
Press the œ or ❷ buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 28
• SP (Standard Play)
• LP (Long Play)
27
GB