Samsung SV-665B Instruction Manual page 22

Hide thumbs Also See for SV-665B:
Table of Contents

Advertisement

Connecting an RCA Audio/Video Input Cable
# (SV-665B/665X/265B Only)
GB
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
#
equipment chosen.
(SV-665B/SV-665X)
Examples: N You wish to copy a video cassette with the help of a
EJECT
STANDBY/ON
PROG
I I
VIDEO
L AUDIO R
LINE IN
1
EJECT
STANDBY/ON
1
PROG
I I
2
VIDEO
L AUDIO R
3
LINE IN
3
3
I I
#
(SV-265B)
4
STANDBY/ON
EJECT
PROG
LINE IN 2
VIDEO
AUDIO
I I
3
1
I I
I I
38
second VCR (see page 39).
N You wish to play back and/or copy pictures taken
with a camcorder (see page 39).
N Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
I I
N Make sure that both the television and the VCR are
switched off before connecting the cables.
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the VCR.
Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the VCR.
Take care to respect the colour coding of the left and right
channels.
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
I I
I I
Using the Assemble Edit Function
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1
Insert the cassette to be edited in your VCR.
2
Press the
ll button to start playback.
3
When you reach the position from which you wish to start the new
recording, press the
ll button.
F.ADV
4
Press the F.ADV (
) button again as often as necessary to
advance frame by frame, until the exact recording position is
located.
5
While the VCR is in still mode, hold the REC button down for
a while to activate the Assemble Edit function.
Result:
Record symbol flashes in the display.
6
Select the source from which you wish to record by pressing:
The PROG/TRK (œ or ❷) / PROG (œ or ❷) buttons for
N
television channels
N
The INPUT button for the LINE IN 1 or LINE IN 2
#
(SV-665B/SV-665X/SV-265B only) input sources
7
Press the
ll button to start recording.
When you have finished recording, press I .
8
Recording from Another VCR or Camcorder
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the VCR, from which the cassette is to be copied, to the
appropriate RCA audio and video input connectors on the rear of
your VCR, as indicated on page 12.
You can also use an RCA audio and video cable to connect the
#
LINE IN 2 input on the front of your VCR.
(SV-665B/SV-665X/
SV-265B only)
2
Insert a blank cassette in your VCR.
3
Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4
Press the INPUT button to select the appropriate input on your
VCR:
N
LINE IN 1 for the rear input
#
N
LINE IN 2 for the front input
(SV-665B/665X/265B only)
5
Start playing back the cassette to be copied.
6
Hold REC down for a while to start recording on your VCR.
When you have finished recording, press I on both VCRs.
7
If you wish to view the cassette being copied:
N
Your VCR must be connected as usual to the
television (see page 11 for further details)
GB
2
REC
MENU
OK
REC
MENU
6
OK
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents