Do you have a question about the RS21 and is the answer not in the manual?
Questions and answers
Juan carlos morales
February 22, 2025
I want to change the table/main board, how can I buy an original spare part of this device
Mohammed Azam
April 10, 2025
Samsung RS21WCNS how I can remove/replace fridge door handle which is broken?
2 comments:
Mr. Anderson
April 10, 2025
To remove or replace the broken door handle on a Samsung RS21WCNS refrigerator:
1. Use a hex wrench to loosen the screws securing the handle. 2. Gently pull the handle away from the door once the screws are removed. 3. To install a new handle, align it with the mounting points. 4. Insert and tighten the screws with the hex wrench.
Make sure not to overtighten and ensure the handle is secure.
This answer is automatically generated
Mohammed Azam
April 10, 2025
Samsung RS21WCNS, I am unable to locate any screws on the door handle they are visible Could you advise me where to look for it
Nasir Qureshi
May 27, 2025
what does "overload mode" means if upon checking loaded functions "overload mode" light is iluminated while referigerator SAMSUNG RS21NGRS is not cooling properly and both R Fan and F Fan are on low speed
1 comments:
Mr. Anderson
May 27, 2025
In the Samsung RS21NGRS refrigerator, "overload mode" refers to a condition where the system detects excessive load or strain, likely due to high temperature or motor resistance. When in this mode, components such as the R-Fan (Refrigerator Fan) and F-Fan (Freezer Fan) may run at low speed to reduce power consumption and prevent damage. This mode helps protect the compressor and other parts during abnormal operation, such as poor cooling performance.
This answer is automatically generated
Сергей Александрович Шинкаренко
April 20, 2025
холодильник самсунг RS21HNLBG что в холодильнике, что в морозильнке одинаковая температура -2, увеличивали температуру в морозильнике, все равно -2. В чем причина
1 comments:
Mr. Anderson
May 10, 2025
The likely reason for both the refrigerator and freezer of the Samsung RS21 showing a temperature of -2°C, despite increasing the freezer temperature, could be one or more of the following:
- The ambient room temperature is very low, affecting internal temperature control. - The temperature control settings may not be set correctly on the display panel. - Items with high water content may be placed in the coldest part of the fridge, affecting overall temperature. - The internal temperature adjustment may be compensating based on environmental factors like location, usage, and door opening frequency.
These factors can prevent the refrigerator from maintaining the set temperature properly.
This answer is automatically generated
. Mandla
April 11, 2025
Hi. My Samsung RS21 double door fridge is displaying R motor error code. May you please assist
1 comments:
Mr. Anderson
April 11, 2025
The R motor error code for a Samsung RS21 double door fridge likely refers to an issue with the R-room fan motor. This fan may be an AC or BLDC motor. If it doesn't work, possible causes include:
1. No periodic NO waveform output from main PCB IC9 – replace the main PCB. 2. Short or broken wires in CoolSelect Zone™ panel, freezer door wire, or CABI wire. 3. Short/open circuit in the panel lighting section of the main PCB. 4. BLDC fan motor delay after door operation at high ambient temperatures (normal delay, not an error).
So, the R motor error code indicates a fault with the fan motor or its control circuit.
This answer is automatically generated
Mohammed Azam
April 10, 2025
Samsung RS21WCNS,
I am unable to locate any screws on the door handle they are visible
Could you advise me where to look for it
1 comments:
Mr. Anderson
April 10, 2025
The screws on the door handle of the Samsung RS21WCNS refrigerator are front mounted and use Phillips head screws.
This answer is automatically generated
michael wardman
March 11, 2025
**** noisy in fridge RS21JLAT
1 comments:
Mr. Anderson
March 11, 2025
The Samsung RS21JLAT fridge is noisy because of ice buildup hitting the fan. This is caused by a faulty defrost heater, which needs to be replaced to fix the issue.
Need help?
Do you have a question about the RS21 and is the answer not in the manual?
Questions and answers
I want to change the table/main board, how can I buy an original spare part of this device
Samsung RS21WCNS how I can remove/replace fridge door handle which is broken?
To remove or replace the broken door handle on a Samsung RS21WCNS refrigerator:
1. Use a hex wrench to loosen the screws securing the handle.
2. Gently pull the handle away from the door once the screws are removed.
3. To install a new handle, align it with the mounting points.
4. Insert and tighten the screws with the hex wrench.
Make sure not to overtighten and ensure the handle is secure.
This answer is automatically generated
Samsung RS21WCNS, I am unable to locate any screws on the door handle they are visible Could you advise me where to look for it
what does "overload mode" means if upon checking loaded functions "overload mode" light is iluminated while referigerator SAMSUNG RS21NGRS is not cooling properly and both R Fan and F Fan are on low speed
In the Samsung RS21NGRS refrigerator, "overload mode" refers to a condition where the system detects excessive load or strain, likely due to high temperature or motor resistance. When in this mode, components such as the R-Fan (Refrigerator Fan) and F-Fan (Freezer Fan) may run at low speed to reduce power consumption and prevent damage. This mode helps protect the compressor and other parts during abnormal operation, such as poor cooling performance.
This answer is automatically generated
холодильник самсунг RS21HNLBG что в холодильнике, что в морозильнке одинаковая температура -2, увеличивали температуру в морозильнике, все равно -2. В чем причина
The likely reason for both the refrigerator and freezer of the Samsung RS21 showing a temperature of -2°C, despite increasing the freezer temperature, could be one or more of the following:
- The ambient room temperature is very low, affecting internal temperature control.
- The temperature control settings may not be set correctly on the display panel.
- Items with high water content may be placed in the coldest part of the fridge, affecting overall temperature.
- The internal temperature adjustment may be compensating based on environmental factors like location, usage, and door opening frequency.
These factors can prevent the refrigerator from maintaining the set temperature properly.
This answer is automatically generated
Hi. My Samsung RS21 double door fridge is displaying R motor error code. May you please assist
The R motor error code for a Samsung RS21 double door fridge likely refers to an issue with the R-room fan motor. This fan may be an AC or BLDC motor. If it doesn't work, possible causes include:
1. No periodic NO waveform output from main PCB IC9 – replace the main PCB.
2. Short or broken wires in CoolSelect Zone™ panel, freezer door wire, or CABI wire.
3. Short/open circuit in the panel lighting section of the main PCB.
4. BLDC fan motor delay after door operation at high ambient temperatures (normal delay, not an error).
So, the R motor error code indicates a fault with the fan motor or its control circuit.
This answer is automatically generated
Samsung RS21WCNS, I am unable to locate any screws on the door handle they are visible Could you advise me where to look for it
The screws on the door handle of the Samsung RS21WCNS refrigerator are front mounted and use Phillips head screws.
This answer is automatically generated
**** noisy in fridge RS21JLAT
The Samsung RS21JLAT fridge is noisy because of ice buildup hitting the fan. This is caused by a faulty defrost heater, which needs to be replaced to fix the issue.
This answer is automatically generated