Samsung VP-D36 Series User Manual page 65

ENGLISH
Playback
Connecting to a TV which has no Audio/Video Input
Jacks
✤ You can connect your Camcorder to a TV through a VCR.
1. Connect the Camcorder to your VCR
with the Multi Cable.
I
The yellow jack: Video
I
The white jack: Audio(L) - Mono
I
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
(VP-D363(i)/D364W(i)/D365W(i) only)
5. Turn on both the TV and VCR.
I
Set the input selector on the VCR to
Line.
I
Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the [Power] switch
to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D363(i)/D364W(i)/D365W(i) only)
3. Insert the tape you wish to play back.
4. Using the [œ œ œ œ (REW)] /[√ √ √ √ (FF)] buttons, find the
first position you wish to play back.
5. Press the [√ √ /❙❙ (PLAY/STILL)] button.
I
The images you recorded will appear on the TV
after a few seconds.
I
If a tape reaches its end while being played back,
the tape will rewind automatically.
[ Notes ]
I
The playback mode (SP/LP) is selected automatically.
I
If the VCR has an S-Video input terminal, you may use S-Video
connector for better quality.
I
The S-Video connector transmits video only. Connect audio cables
for sound.
I
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
✤
VCR
Multi Cable
TV
Signal flow
Multi Cable
Antenna
I
I
I
I
I
I
I
Camcorder
AV/ S
QU ICK
ME
NU
I
I
√ √ √ √
√ √ /II
I
I
œ œ œ œ
65 65