Maytag Neptune MAH-3 Use & Care Manual page 5

DC68-02030B-01 MAH-3 12/15/05
U C
SING THE
Step 1
S
ELECT
Select the appropriate cycle for the type of load.
This will determine the tumble pattern and spin speed for the cycle.
NOTE: To minimize wrinkling of loads, select the Wrinkle Control cycle.
Sanitary (select models) – For heavily soiled, colorfast garments.
This cycle heats the water to 150°F to eliminate bacteria.
NOTE: If Pause is selected during the heating portion of the Sanitary Cycle, the
washer door will remain locked for your safety.
Super Wash – For sturdy, colorfast fabrics and heavily soiled garments.
Normal – For most fabrics including cottons, linens and normally soiled garments.
Whites (select models) – For white fabrics with or without bleach.
Wrinkle Control – For "wash and wear" and synthetic fabrics and lightly to normally
soiled garments.
Colors (select models) – For bright fabrics or fabrics that may bleed.
Delicates – For sheer fabrics, bras and lingerie.
Hand Wash – For wool, silk and other hand-wash-only fabrics.
For best results, use liquid detergent.
Quick Wash – For lightly soiled or wrinkled garments needed quickly.
Enviro Plus (select models) – For geographic areas where energy and water
conservation is needed.
3:11 PM Page 6
ONTROLS
C
YCLE
4
Control features vary by model.