Cool - Samsung AS09E Series User Manual

Cool

In Cool mode, the air conditioner will cool your room. You can adjust the temperature and the fan
speed to feel cooler in hot season.
1. Turn on the air conditioner.
Press the Power
2. Set the operating mode.
Press the Mode button on the remote control until
Cool mode indicator appears on the remote control
display.
The air conditioner operates in Cool mode and it will
lower the temperature in your room.
Each time you press the Mode button, the mode will
change in order of Auto, Cool, Dry, and Fan.
3. Set the temperature.
Press the Temp or  button on the remote control
to increase or decrease the desired temperature.
You can set the desired temperature between
the range of 16˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
4. Set the fan speed.
Press the Fan  or  button on the remote control to
set the desired fan speed.
If room temperature reaches desired value, the air
conditioner will shut off cooling for a while and just the
fan runs.
Each time you press the Fan  or  button,
fan speed will change in order of Auto, Low, Medium
and High.
• While you are using the remote control, make sure correct indicator which matches your
• Air flow can be adjusted manually (see page 18 for instructions).
• If current outside temperatures are much higher than the selected indoor temperature,
Panama AS09E series_IB_30743A_E_CO_11.20.09.indd 15
button on the remote control.
selection appears on the remote control display.
operating _15
2009-11-20 13:44:08