Part Names; Front - Pioneer PDA-V100HD User Manual

Part names

Chapter 5
Part names

Front

1 2 3 4
STANDBY
STANDBY/ON
1 STANDBY/ON button
Press to set power to ON/STANDBY.
2 Power ON indicator (blue)
Lights blue when unit power is turned ON.
3 STANDBY indicator (red)
Lights red when unit power is set to STANDBY.
4 Remote control unit sensor
Point the remote control unit at this sensor when
operating.
5 HDMI CONTROL indicators
(Left: orange/ Right: green)
When this unit is connected to a plasma television,
these indicators light under the following conditions:
a. PDP combination mode:
Lights green when HDMI CONTROL switch is set to
ON, and the unit's connected plasma television can
be operated using the latter's remote control unit.
(See page 10.)
b. Independent 1 mode:
Lights orange when the HDMI CONTROL switch is
set to ON. (See page 10.)
c. Independent 2 mode:
Do not light when the HDMI CONTROL switch is
stet to OFF. (See page 10.)
5 6 7
INPUT INPUT
1 2 3 4 5 6
8
6 INPUT button
Use to select the unit's source INPUT 1 to INPUT 6.
7 Input indicators
Notifies user of currently selected input and currently
set mode.
8 Blue illumination
Lights blue when unit power is turned ON. Flashes blue
during setting mode.
05
PDA-V100HD
9
En