Samsung SGH-E740S Service Manual page 20

Exploded View/Disassembly&Assembly Instructions
1) Undo a hook at the bottom of slide lower
9
with a disassembly tool and disassemble the
rear in the direction which the arrow points
to.
1) Take care of not scratching on the slide upper and
lower.
2) Use a disassembly tool.
1) Take away SUB PBA from the slide upper.
11
1) Be careful of not scratching on LCD.
2) Be aware of dust inside the main window of slide
upper.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
1) Take off camera, speaker and motor.
10
1) Pay special attention to not scratching on FPCB
and damaging on nearby components.
1) Remove a green insulation tape.
2) Remove soldered joints on both sides of
12
FPCB.
3) Take an FPCB off.
4) Unscrew 3 screws at the bottom of SUB PBA.
1) Unscrew screws.
1) Pay special attention to surrounding
components when using a soldering iron.
2)
Use a cruciform screwdriver.
5-6