Samsung SGH-E740S Service Manual page 19

1) Pull out the LCD connector raising a PBA
5
by your own hand.
1) Be aware of not damaging on FPCB.
1) Unscrew 4 front screws.
7
Unscrew
screws.
1) Take care of not scratching on the front.
2) Use a cruciform screwdriver.
This Document can not be used without Samsung's authorization
Pull out the connector
SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
1) Take off volume key FPCB and camera key
6
FPCB outward from the front.
2) Take off a shield can from the front.
1) Be aware of not damaging on camera key and volume
key FPCBs.
1) Remove 2 screw caps at the top of the
8
slide lower with tweezers.
2) Unscrew 4 slide lower screws.
1) Remove screw
caps.
2) Unscrew screws.
1) Unscrew screws.
1) Take care of not scratching on the slide lower.
2) Use a cruciform screwdriver.
3) When you remove screw caps, use tweezers.
5-5