Samsung SGH-i560V Service Manual page 112

Disassembly and Assembly Instructions
Attach the camera LED at guide hole.
5
2) Attach the insulation tape and fit the
SPK Connector to header.
3) Put the SHIELDCAN at right position and
screw down at four points.
1) Watch out not to damage the chip.
1) Set the PBA on the slide upper parts.
2) Assemble the Rear frame from the top.
7
1) Handle with care not to have scratches and
not to damage the molds.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1) Slide up a little bit and connect the
6
LCD connector first,Key FPCB connector and
BT antenna between rib.
1) Watch out not to damage the chip and BT ant.
2) Watch out the connectorto fit firmly.
3) Handle with care the FPCB not to be torn or
damaged.
1) Screw down at four points.
8
1) Handle with care not to have scratches and
not to damage the molds.
11-4