Assembly Instructions - Samsung SGH-i560V Service Manual

11-2. Assembly Instructions

1) Fit the lower frame to the Upper parts.
1
2) Screw down the lower frame.
1) Handle with care not to have scratches and
not to damage the molds.
2) Handle with care the FPCB not to be torn or
damaged.
1) Attach the three electric conduction
3
tape as below.
1) Handle with care the FPCB not to be torn or
damaged.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
1) Assemble the upper parts and the front
2
frame
2) Screw down the front frame at six
points.
1) Handle with care not to have scratches and
not to damage the molds.
2) Handle with care the FPCB not to be torn or
damaged.
1) Fit the Power key to be right part higher.
4
2) Assemble the SPK box the right hooker first.
3) Fit the motor to speaker box, and screw
down in one point.
4) Attach the absorber tape.
1) Assemble the SPK box fit firmly.
2) Before fitting the motor, twist the wire
twice.
3) The wire of the motor should not be above the
gold line.
4) Handle with care not to damage the camera
FPCB and the chip.
5) Attach the absorber tape as guided in the
picture.
11-3