Table of Contents
Advertisement
Disassembly and Assembly instructions
5
1) PUT THE CAMERA ON THE ROOM.
2) CONNECT MOTOR AND SPEAKER.
3) ATTACH THE INSULATION TAPE ON IT.
※ caution
1) CONFIRM CAMERA MODULE NOT TO BE TILTED.
7
1) JOIN THE CAMERA KEY AND VOLUME
KEY.
※ caution
1) CONFIRM THE RIGHT DIRECTION.
2) CONFIRM GOOD CLICK SENSITIVITY.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
6
1) PUT THE MAIN PBA TO THE FRONT
ACCORDING TO THE BOSS AND PBA
HOLDER.(SEE THE PICTURE BELOW.)
※ caution
1) CONFIRM SAFE ARRIVAL OF MAIN PBA.
8
1) JOIN THE REAR COVER.
2) CENTER THE CAMERA.
※ caution
1) CONFIRM THE CAMERA TO BE CENTERED.
6-4
Advertisement
Table of Contents
