Table of Contents
Advertisement
6-2. Assembly
1
CHECK THE GUIDE RIB.
1) PUT THE KEYPAD ON THE GROOVE OF
FRONT.
※ caution
1) CONFIRM SAFE ARRIVAL OF KEYPAD ON
THE GUIDE RIB.
3
1) JOIN CAMERA MODULE TO MAIN PBA.
※ caution
1) CONFIRM GOOD CONNECTION BETWEEN
FPCB AND CONNECTOR.2) CONFIRM THE
CONNECTOR NOT TO BE TILTED.
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
2
1) CONNECT LCD FPCB TO LCD CONNECTOR.
2) ATTACH LCD TO MAIN PBA ACCORDING TO
THE GUIDE RIB.
3) ATTACH THE INSULATION TAPE.
※ caution
1) CONFIRM GOOD CONNECTION BETWEEN
FPCB AND CONNECTOR.
4
1) JOIN THE INTENNA AND SCREW DOWN.
※ caution
1) CONFIRM SAFE ARRIVAL OF INTENNA.
6-3
Advertisement
Table of Contents
