Table of Contents
Advertisement
7
Update software
To continue to get the best features and support for
your home theater, update the software regularly.
Compare the version of your current software with
the latest version on www.philips.com/support.
Check software version
1
SETUP.
Press
2
Select [Preference Setup], and then press OK.
3
Select [Version Info.], and then press OK.
» The software version is displayed.
Update software through USB
or CD-R
What you need
•
A CD-R or a USB flash drive with at least
75MB of memory. The USB flash drive must be
FAT formatted. Do not use a USB hard drive.
•
A computer with Internet access.
•
An archive utility that supports the ZIP
file format (for example, WinZip® for
Microsoft® Windows® or Stufflt® for
Macintosh®).
Step 1: Download the latest software
1
Connect a USB flash drive or insert a CD-R
to your computer.
2
In your web browser, go to www.philips.
com/support.
3
At the Philips Support website, find your
product and locate the Software and
drivers.
» The software update is available as a zip
file.
4
Save the zip file in the root directory of
your USB flash drive or CD-R.
5
Use the archive utility to extract the
software update file in the root directory.
» The files are extracted under the
UPG_ALL folder of your USB flash drive
or CD-R.
6
Remove the USB flash drive or CD-R from
your computer.
Step 2: Update the software
Warning
•
If you use a USB flash drive, make sure that
there is no disc in the disc compartment, and
the disc compartment is closed.
1
Connect the USB flash drive or insert the
CD-R to your home theater.
2
Switch your TV to the correct source for
your home theater.
3
Follow the instructions on the TV to
complete the update.
» When the software update is complete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds, and
then reconnect it.
Note
•
When the software update is in progress, do
not turn off the power, or remove the USB
flash drive or CD-R.
EN
21
Advertisement
Table of Contents
