Table of Contents
Advertisement
O O P P E E R R A A T T I I O O N N S S ( ( c c o o n n t t i i n n u u e e d d ) )
Input Menu
The following functions are available when INPUT is selected on the
menu. Select an item with the
operation with the
Table 1.4 Input Menu
Item
Displays RGB input frequency: Displays the horizontal and vertical sync
RGB
signal frequency for RGB input.
* It is effective only at the time of input of RGB.
Select video signal type:
Select the signal type with the
Select NTSC, PAL SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate
for the input signal.
Auto Adjust is valid at VIDEO/S-VIDEO input when AUTO is selected,
VIDEO
and is then used for automatic selection of the signal type.
* Use this function when the image becomes unstable (eg. the image
becomes irregular, or lacks color).
* Auto Adjust requires approximately ten seconds. It may not function
correctly with some input signals. Pressing the AUTO! button in this case
may correct this problem.
Automatic adjustment at RGB input: Select EXECUET with the
Horizontal position, vertical position, clock phase, and horizontal size are
automatically adjusted when RUN is selected. Use with the window at
maximum size in the application display.
Automatic adjustment at VIDEO/S-VIDEO input:
Select EXECUET with the
AUTO
A signal type appropriate for the input signal is selected automatically
when EXECUET is selected. Valid only if AUTO is selected in VIDEO
(see above).
* This operation requires approximately ten seconds. It may not function
correctly with some input signals. Pressing the AUTO button in this case
may correct this problem.
* This function is the same as for Auto Adjust in Basic operation.
1-12
and
buttons, and start or stop
and
buttons.
Description
and
buttons.
button.
SETUP
INPUT
IMAGE
OPT.
fH:38kHz
RGB
fV:60Hz
VIDEO
AUTO
button.
Advertisement
Table of Contents
