∫
Available Flash Settings in Recording Mode
The available flash settings depend on the Recording Mode.
(±: Available, —: Not available, ¥: Scene Mode initial setting)
* + : ;
, /
ï 5
-
.
1 í 9
¢ [
] is displayed.
•
The flash setting may change if the Recording Mode is changed. Set the flash setting again if
necessary.
•
The flash setting is memorized even if the camera is turned off. However, the Scene Mode flash
setting is reset to the initial setting when the Scene Mode is changed.
•
Flash will not be activated when recording motion picture.
∫
The available flash range
[AUTO] in
[Sensitivity]
∫
Shutter speed for each flash setting
Flash setting
‡
‰
¢1 Varies according to the settings of [Min. Shtr Speed] and [Sensitivity].
¢2 When [Min. Shtr Speed] is set to [AUTO]. Varies according to the [Sensitivity] setting.
¢3 When [
] in [Sensitivity] is set.
¢2, 3: The shutter speed becomes a maximum of 1 second in the following cases.
•
–
When the Optical Image Stabilizer is set to [OFF].
–
When the camera has determined that there is very little jitter when the Optical Image Stabilizer is
set to [ON].
•
In Intelligent Auto Mode, shutter speed changes depending on the identified scene.
•
In Scene Mode, shutter speed will be different from the above table.
‡
¢
±
±
±
—
¥
—
±
¥
Wide
60 cm (2.0 feet) to 4.1 m (13 feet)
Shutter speed (Sec.)
¢1
1/60
to 1/1600
Recording
‰
—
—
±
±
¥
±
—
—
±
—
—
—
±
—
±
±
1.5 m (4.9 feet) to 2.1 m (6.9 feet)
Flash setting
Œ
- 60 -
Œ
±
—
±
±
±
—
¥
—
±
—
¥
±
¥
—
±
—
Tele
Shutter speed (Sec.)
¢1
1
to 1/1600
¢2
1 or 1/8 to 1/1600
¢2, 3
1 or 1/4 to 1/1600