Performing Smart Transfer - Panasonic Lumix DMC-SZ9 Owner's Manual

Performing smart transfer

Preparation: Configure [Smart Transfer] in advance.
1
Turn off the camera.
2
(When using a power outlet)
Connect the AC adaptor (supplied) and this camera with the USB connection cable
(supplied), and insert the AC adaptor (supplied) into the power outlet.
(When using a PC)
Connect this unit to a PC by using the USB connection cable (supplied).
•
[Smart Transfer] starts automatically according to the [Charge Priority]
• [Smart Transfer] is not available when the memory card is locked.
•
Depending on the specifications of the PC, [Smart Transfer] may fail.
Except at the ambient temperatures between 0 oC and 40 oC (32 oF and 104 oF), [Smart Transfer]
•
may not work.
•
When [Destination] is set to [PC], images are saved in the folder you have created for receiving.
(P147)
•
If there are images that are not transferred when [Auto Transfer] is set to [OFF], the message that
confirms whether to transfer these images is displayed. Select a desired option.
∫
Transfer images instantly
Preparation: Configure [Smart Transfer] in advance.
1
Connect the AC adaptor (supplied) and this camera with the USB connection cable
(supplied), and insert the AC adaptor (supplied) into the power outlet.
•
Switch to Playback Mode.
2
Select [Wi-Fi Setup] in the [Wi-Fi] menu, and press [MENU/SET].
3 Press 3/4 to select [Smart Transfer], and press [MENU/SET].
4
Press 3/4 to select [Transfer Now], and press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Wi-Fi
(P159)
(P159)
- 160 -
(P162) setting.
(P44)