When Sending Images To Printer - Panasonic Lumix DMC-SZ9 Owner's Manual

When sending images to Printer

Preparations:
• You can print out recorded pictures wirelessly from a PictBridge (wireless LAN-compatible)
¢ Compliant with the DPS over IP standards.
See the following website for information on the PictBridge (wireless LAN-compatible) printer.
http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
1
Press [Wi-Fi].
2
Press 3/4/2/1 to select [New Connection], and then
press [MENU/SET].
• When connecting with the setting you used before, you can select the connection destination
from [History Connection]
3
Press 3/4 to select [Send Images Stored in the Camera], and then press [MENU/
SET].
4 Press 3/4 to select [Printer], and then press [MENU/SET].
5
Press 3/4 to select connection method, and then press [MENU/SET].
[Via Network]
[Direct]
6
Press 3/4 to select a printer you want to connect, and then press [MENU/SET].
7
Select pictures, and then print.
•
To change the setting or disconnect, press [Wi-Fi].
•
Motion pictures cannot be printed out.
(P135) or [Favorite Connection] (P136).
When you want to connect to your Printer via a wireless access point.
(P138)
When you want to directly connect your printer to this unit with [Wi-Fi
Direct], [WPS Connection], or [Manual Connection].
(P184)
Wi-Fi
(P142)
- 158 -
¢
printer.
(P140)