I would like to return the image in the WEB service to the camera.
•
The images in the WEB Service cannot be saved (downloaded) to this unit. Do not delete the
uploaded images, and make a backup of them.
I cannot display or delete the images uploaded to the WEB service by this unit.
•
The images uploaded to the WEB service cannot be displayed or deleted by this unit.
> Perform the task using a smartphone/tablet or a PC.
Your "LUMIX CLUB" login ID and password were deleted after sending the camera in
to be repaired.
•
The settings stored in the camera may be deleted depending on the type of repair.
> Always make a copy of important settings.
There is an image that could not be transmitted.
•
Is the size of the image too large?
> Divide the motion picture using [Video Divide] (P119).
> Reduce the size of the still picture, then transmit (P145, 161).
•
Capacity or number of images in the WEB service is full.
> Login to "LUMIX CLUB", and check the status of the destination on the WEB service link
settings.
I have forgotten the password for the Wi-Fi.
> Execute the [Reset Wi-Fi Settings] in the [Setup] menu.
> However, all the information you have set on the [Wi-Fi Setup] menu, which includes the "LUMIX
CLUB" login settings, will be reset. (excluding [LUMIX CLUB])
Transmission of the image fails midway.
•
Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide] (P119).
> Reduce the size of the still picture, then transmit (P145, 161).
> Image cannot be transmitted when the battery indicator is flashing red.
Motion picture cannot be transmitted.
•
File format of the motion picture that can be sent differs depending on the destination.
•
Is the size of the image too large?
> Transmit after dividing the motion picture with [Video Divide] (P119).
I cannot send images to an AV device.
•
Sending may fail depending on the operational status of the AV device.
Also, sending may take a while.
Others
(P52)
- 208 -
(P129)