Important Rigging Reminder; Care And Maintenance - Mackie DLM12 Owner's Manual

Important Rigging Reminder:

To reiterate, Mackie is not in the business of
providing complete rigging systems, either as designers,
manufacturers, or installers. It is the responsibility
of the installer to provide a properly engineered,
load-certified rigging system for supporting the
loudspeaker from structure.
Flown at a 30˚ angle
Top Fly
Points

Care and Maintenance

Your Mackie loudspeakers will provide many years of
reliable service if you follow these guidelines:
• Avoid exposing the loudspeakers to moisture.
If they are set up outdoors, be sure they are
under cover if rain is expected.
• Avoid exposure to extreme cold (below
freezing temperatures). If you must operate
the loudspeakers in a cold environment, warm
up the voice coils slowly by sending a low-level
signal through them for about 15 minutes prior
to high-power operation.
• Use a dry cloth to clean the cabinets. Only do
this when the power is turned off. Avoid getting
moisture into any of the openings of the
cabinet, particularly where the drivers are
located.
18
DLM8/12 Powered Loudspeakers
Top Fly
Points
Bottom Fly Point
(adjusts angle)
Flown at a 45˚ angle
Bottom Fly Point
(adjusts angle)