Installing And Removing The Wireless Adapter - Casio XJ-A246 Function Manual

Installing and Removing the Wireless Adapter

The projectors come with wireless adapters YW-3. You can install and remove the wireless adapter as
required.
*
Caution
Important!
Keep the wireless adapter in a safe place when it is not installed on the projector.
Never try to use the wireless adapter that comes with the projector with any other type of
device.
Never try to connect any other type of device to the special YW-3 port located under the
wireless adapter cover of the projector. Doing so can result in malfunction and other trouble
with the projector and/or connected device.
To install the wireless adapter on the projector
1.
Turn off the projector and unplug its power cord from the power outlet.
2.
Loosen the two screws
the top of the cover towards you to remove it.
3.
Plug the wireless adapter into the special YW-3 port
4.
Replace the cover and secure it with the two screws.
Keep the wireless adapter that comes with the projector out of the reach of
small children. Accidental swallowing of the product can interfere with proper
breathing and create a life-threatening situation.
1
that secure the wireless adapter cover, and then pull
1
2
41
inside the cover.
2