Getting Started; Set-Up - Alcatel One Touch 888 User Manual

1

Getting started

1.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off your
phone and remove battery before inserting or removing the SIM card.
one touch 888
one touch 888D
After removing the back cover, insert your SIM card according to the graphics on
the back of the phone. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
.....................
(1)
13
Installing or removing the battery
• Insert and click the battery into place, then close the telephone cover.
• Unclip the cover, then remove the battery.
Charging the battery
Connect the battery charger to your phone and mains socket
respectively.
• Charging may take about 20 minutes to start if the battery is flat.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The mains socket must be near to the phone and easily accessible (avoid
electric extension cables).
• When using your telephone for the first time, charge the battery fully
(approximately 3 hours). You are advised to fully charge the battery ( ).
14