Table of Contents
Advertisement
Lights
Replacing Rear Bulbs
MOUNTING NUT
MAINTENANCE LID
1.
Open the trunk lid, and remove
the left or right maintenance lid.
Remove the mounting nut with an
2.
8 mm wrench.
378
BOLTS
TAIL LIGHT TRIM
3.
Carefully pry in the top or bottom
edge of the trim with a small flat-
tipped screwdriver, and pull the
trim straight back.
4.
Remove the two mounting bolts
with an 8 mm wrench.
5.
Pull the taillight assembly straight
back out of the body.
6.
Determine which of the two bulbs
is burned out: turn signal or back-
up light.
7.
Remove the socket by turning it
one-quarter turn counterclockwise.
8.
Remove the burned out bulb by
pulling it straight out of its socket.
BULBS
Advertisement
Chapters
Table of Contents
