Table of Contents
Advertisement
OnStar
OnStar Services Button
Press this button to contact an
OnStar advisor. You will hear a
chime, followed by the
announcement, ''Connecting to
OnStar.'' The connection should take
about 15 seconds. The advisor will
assist you with any of the services
included in your plan.
Depending on which service you
request, you may need to give your
Personal Identification Number
(PIN) to the advisor. Your PIN is a
number you make up and provide
when you establish your OnStar
service.
If cellular telephone service is not
available in the area you are driving
in, you will hear a fast busy signal.
The system will retry the connection
several times before returning to the
ready mode.
266
To cancel the retry, press the white
phone button.
A microphone is located in the base
of the OnStar control panel so you
can speak to the advisor without
taking your hands off the steering
wheel or diverting your attention
from the road. The OnStar advisor's
voice comes from the audio system's
speakers. Use the volume control on
the audio system or on the steering
wheel to adjust the volume.
Recording an Advisor or Virtual
Advisor Message
You can record up to 5 minutes of
information from your OnStar
Advisor or the virtual advisor. This is
helpful for reviewing the route, hotel,
or restaurant information you
receive from the OnStar center.
To record a message:
During your call to the advisor or
virtual advisor, press and release
the OnStar button. The system
beeps to indicate that it is
recording.
When you are finished recording,
press and release the OnStar
button again. The system beeps
and stops recording.
To hear the first playback of a
message:
Press the white phone button. The
system responds with ''OnStar
ready.''
Say ''Advisor playback.'' The
recorded message is played
through the audio system
speakers.
When you are finished listening,
press the white phone button. The
system responds with ''Goodbye.''
Advertisement
Chapters
Table of Contents
