By Go Home - Acura 2010 RL Navigation System Owner's Manual

NOTE:
When finishing a "Today's
Destinations" trip, the Today's
Destinations list entries are stored to
the Previous Destinations list,
beginning with the date (e.g., item 1
shown below). This entry contains all
the destinations that were included in
the Today's Destinations itinerary. This
allows you to reselect the entire Today's
Destinations content at a later date.

By Go Home

Selecting Go Home from the MENU
screen (Enter destination by) takes
you home or to a frequently used
address you have chosen. The displayed
address will correspond to which
Remote Keyless Entry (Driver 1, Driver
2) is being used.
If a PIN Number has been set, the
system prompts you to enter your PIN.
Say or enter your PIN, and the system
will then display the Calculate route to
screen (see Driving to Your Destination
on page 52).
If a PIN Number has not been set, the
system displays the Calculate route to
screen after you select Go Home (see
Driving to Your Destination on
page 52).
2010 RL
Entering a Destination
NOTE:
• To edit Home Address, see Home
Address in System Setup on page
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 106.
• PINs are optional. If you choose to
use a PIN, make sure you remember
it. If you forget your PIN, your dealer
will have to reset it for you.
• If a PIN is desired, enter it using the
Personal preference PIN number
feature in SETUP. See page
information on entering your PIN
number.
Navigation System
98.
99 for
51