Bluetooth® Handsfreelink; Remote Keyless Entry Setting - Acura 2010 RL Navigation System Owner's Manual

Getting Started
If you press the CANCEL button, the
message will be displayed the next time
you start the vehicle.
NOTE:
The system will display the current
message and any older or previously
unread messages, with the newest
message listed first.
18
Navigation System
®
Bluetooth HandsFreeLink
If you have a Bluetooth-compatible cell
phone that is paired, then CALL on the
Calculate route to screen is enabled.
When you select CALL, the system
dials the number shown on the screen. If
CALL is not available (grayed out), and
your phone is paired, then make sure the
phone has service or that HFL is not in
use; press the HFL BACK button.
For more information on Bluetooth®
HandsFreeLink®, see your Owner's
Manual and the official website
(www.acura.com/handsfreelink).
2010 RL
®
Remote Keyless Entry
Setting
When you unlock the door and enter the
vehicle, the Multi-Information Display
(MID) in the gauge assembly welcomes
you with one of the following displays:
"Welcome Driver 1," "Welcome Driver
2," or just "Welcome." The vehicle
"senses" the driver number based on
which Remote Keyless Entry is used to
unlock the vehicle. If both drivers
approach the vehicle with remotes, the
welcome display and related settings are
based on which remote the vehicle
senses first.
NOTE:
• If both remotes come within range
simultaneously, the "Welcome"
display may be unpredictable.
• If only "Welcome" is displayed, then
all Setup settings revert to factory
defaults, and all personal data (such
as Address Book or Calendar) are not
available.