Optional Recharging Dock - Philips SBCRU940/00 User Manual

Introduction
2 Insert 4 AA batteries (included
with the Remote Control) as
indicated on the bottom of
the battery compartment.
3 Slide the battery door back on.
After a few seconds, the Remote Control starts up automatically and beeps
twice to indicate that it is ready to use.
When batteries are running low, the Low Battery icon
top of the display. Replace the batteries as soon as possible to ensure perfect
performance.
Note

Optional recharging dock

Warning
1 Slide the battery door off the back of the Remote Control.
2 Remove the plastic AA battery tray
from the battery compartment.
3 Insert the battery pack (included
with the recharging dock) as
indicated on the side of the
battery pack.
User Guide
4
The Remote Control retains all settings when batteries have run out or when
you replace them. You will only have to reset the clock.
Use the recharging dock only with the Philips NiMH rechargeable battery pack.
flashes at the center