Specifications - Philips SBCRU940/00 User Manual

Hardware
Software
Infrared (IR)
Memory
Batteries
Battery life
Power
management
Dimensions
Operating
temperature
Accessoires
User Guide
39
High-resolution (320 x 240) liquid crystal display (LCD) with contrast control
Large touchscreen
Seven programmable direct-access buttons
Backlighting for LCD and direct-access buttons
Built-in RC-5 and RC-6 codes
Infrared sending and learning eyes
3-wire (RS232) serial port connector
Dynamic, animated interface
Editable macros (up to 255 commands per macro)
Total number of devices and macros limited only by memory
Operating distance of 10 meters (33 feet)
Learning frequency up 56 KHz
Learning distance 2,5 cm (1 inch) up to 30 cm (1 foot)
1 MB non-volatile flash memory (retains commands when batteries
are not present)
512 K SRAM
4 AA 1,5V batteries, or one 4,8V rechargeable battery pack
Approximately 6 months with typical use
Power on by tapping the touchscreen, power off automatically
138mm x 92mm x 38mm (5.4 inch x 3.6 inch x 1.5 inch)
0°C to 50°C (32°F to 122°F)
Remote Control recharge package DS1000 (not included)
NiMH 4,8V rechargeable battery pack
Recharging dock
110/220V-to-12V power adapter
RS232 cable for PC connection
The specifications and design of this product are subject to
change without notice.

Specifications