Philips SBCRU940/00 User Manual page 9

Table of Contents

Advertisement

Using touchscreen buttons
Sending commands
By tapping the touchscreen buttons you send commands to the device you have
selected. When you send a command, the Remote Control icon shows
transmitting signals
tab.
Scrolling
Most devices have more than one control panel. You can scroll through these
control panels using
screen indicates the panel number and the total number of panels, for example
.
By holding down a scroll button, you go repeatedly through all the control panels
of a device in a loop.
Operating a device without affecting the active device
You can operate a device while another device is active (for example, rewinding
your VCR while watching TV) via the Device menu:
1 Open the device menu.
2 Press and hold the Left or Right button (labeled NO IR).
The Remote Control icon turns around.
User Guide
9
Getting Started
. The name of the active device is indicated on the device
and
. The panel number on the left bottom of the

Advertisement

Table of Contents
loading

Table of Contents