Table of Contents
Advertisement
b d
Dual Screen
® Ò
Select the desired TV channel and press the OK
key in the centre of the cursor.
®Ò‡π†
Video recorder see p. 27.
Q†
Surround-mode selection
Press this key repeatedly to select another
surround mode: Pro Logic, Dolby 3 Stereo, Hall
æ
TV
NEX
To activate/de-activate the frozen picture.
The volume is adjusted. If you want to store
the volume adjustment in the memory, see the
Setup menu, Store Pers. Pref., p. 8 to store
the same volume adjustment for all the stored
Temporarily interrupt the sound or restore it.
P
Programme selection
To browse through the TV channels activated
in the Favourite Programme menu. See p. 7.
To select a TV channel.
For a two digit programme number, enter the
second digit within 2 seconds.
10
Use of the remote control
see p. 17
c
for future use
and
PICTURE, SOUND
‡
menu
FEATURES
π
Programmes
or Off.
on/off see p. 18
IEW
S
Freeze
V
Volume
TV channels.
¬
Mute key
0/9
Digit keys
w
Select peripherals
Press this key repeatedly to select
according to where you connected your peripherals (see p. 27).
TV VCR DVD SAT
TV, Video recorder, DVD or Satellite operation
Press one of this keys to use the remote control directly in the
TV, video recorder, DVD or satellite mode.
w
B
TV
VCR
DVD
SAT
b
c
d
Q
®
Ò
‡
π
†
b
æ
j
S
V
¬
P
1
2
3
4
5
6
7
8
9
◊
0
i
0
SMART
SMART
M
q
a
SOUND
PICTURE
0
Previous programme
The previously selected TV channel is displayed.
The ◊ indication has a video recorder/DVD function.
i
Screen information / Permanent programme number
Press for 5 seconds to activate/de-activate the continuous display of the
programme number and extended or reduced display of TV channel and
programme information on the screen. This function is not available when
continuous subtitles have been switched on.
Press briefly to display information about the selected TV channel and
programme, the sound reception, the selected DNR setting and picture
format and the remaining time set with the sleeptimer.
Press i to activate/de-activate the continuous display of the zoom
magnification. (only for 32" or 82 cm sets)
EXT1, EXT2, EXT3
B
Standby
The set is switched off and the red indicator
(green in the case of
TV
NEX
acquisition) lights up.
In case of
TV
acquisition the TV is
NEX
IEW
switched to full standby after about 30 min.
and the red indicator lights up.
To switch the TV on again, press - P + or the
digit keys.
If your EasyLink video recorder has the
system standby function and you press the
standby key for 3 seconds, both the TV and
video recorder are switched to standby.
b
Teletext
on/off see p. 22.
j
Continuous subtitles
TV channels with teletext often transmit
certain programmes with subtitling.
Switch on teletext and select the proper
subtitle page from the index.
j
Press
to store the subtitle page.
Switch off teletext.
Every time a programme of the selected TV
channel is subtitled, the subtitling will be
available for that TV channel.
j
Press
to switch subtitles On or Off.
When switched on and the subtitle symbol
appears, there are no subtitles available for
that programme.
Note: subtitling is not available when in Dual
Screen mode with teletext.
or
,
FRONT
info
IEW
Advertisement
Table of Contents
