Timer; Adding Programme To Timer List; Editing Timer List; Switching Off Current Timer Functions - Philips DTR 200 Operating Instructions Manual

NOTE: Depending on the time of day, also "tomorrow" may be
displayed.
- By pressing the channel + or - button, you can view
the EPG of another channel.
- If you want to adopt a programme into the timer list,
highlight it and press the TIMER/REC button.
Acknowledge the following request by pressing the OK
button.
NOTE: Detailed information on the subject "timer" can be
found in the next paragraph.
3 Close the EPG by pressing the EXIT button .

Timer

By means of the timer setting, you can switch your
receiver on and off at a specific time, for instance, in order
to allow for the recording with a video-tape recorder. The
device then automatically switches on in the standby
mode. If the device is already switched on, the device
automatically switches to the selected programme.
NOTE: Remember to program your video-tape recorder to the
respective time.

Adding programme to timer list

The timer function is included into the timer list via the
EPG, see previous paragraph.
1 Open the
EPG and highlight the desired programme.
2 Press the TIMER/REC button.
3 Press the OK button.
The window is closed and the selected programme is
stored in the timer list.

Editing timer list

During the normal programme replay, press the TIMER/
REC button to open the timer list.
PERATION
12 O
Deleting (a) programme(s)
1 Select the desired programme.
2 Press the respective colour button:
red: the selected programme is deleted
yellow: all programmes are deleted.
3 Press the OK button to acknowledge the following
request.
Timer editing
1 Select the desired programme and press the OK button.
2 Alter the displayed settings by using the arrow and
numerical buttons. In doing so, you can:
- change the date (month and day)
- the time (starting time and duration)
- the cycle (interesting for series and regularly recurring
programmes)
3 Then highlight OK behind adopt, and press the OK but-
ton.

Switching off current timer functions

NOTE: During a timer programme, only few buttons
can be activated: I-II, APP, OPT, as well as the volume
buttons + and -, as well as the mute button.
To switch off the timer function:
1 Press on / off.
A programme message is displayed.
2 Press the OK button.