ConvenienceAndRemoteStartFeatures - Viper 7900 Owner's Manual

The alarm can be programmed to automatically arm after exiting
the vehicle. Refer to Passive Arming section of this guide for
more details.
Passive locking
The door can be programmed to lock when the alarm passively
arms.
Forced passive arming
The alarm can be programmed to arm after one hour even if an
entry point is accidentally left open.
Automatic Engine Disable
The starter kill can be programmed to automatically activate 30
seconds after the ignition is turned off to secure the vehicle if the
alarm is not armed.
Nuisance Prevention Circuitry
The default is on. This feature can be programmed off so
the alarm will not bypass the sensor inputs after three trigger
events.
Convenience and remote start features
Ignition on locking
This feature will lock the doors three seconds after the ignition is
turned on, unless a door is open. The default setting is on, and
can be programmed off if the feature is not desired.
Ignition off unlocking
This feature will unlock the doors immediately when the ignition
is turned off. The default setting is on, and can be programmed
off if the feature is not desired.
© 2 0 0 6 d i re c t e d e le c t r on i c s— a l l r ig ht s r es e r v e d