Changing Functions; Operation; Select Depth Units - Standard Horizon MD150 Owner's Manual

5 Operation

5.1 Changing Functions

The upper and lower display sections can be
configured to display depth or speed readings. The
remaining functions are available on either the upper
or lower display only.
The key selects functions dedicated to the
upper display. The selection remains in memory
after power down.
Page 8
SPEED
TRIP DISTANCE
AVERAGE SPEED
TRIP DISTANCE
MAXIMUM SPEED
TRIP DISTANCE
DEPTH
TRIP DISTANCE
TEMPERATURE
TRIP DISTANCE
Owner's Manual
The key selects functions dedicated to the
lower display. The selection remains in memory
after power down.

5.2 Select Depth Units

When the top section of the display is indicating
depth, press and hold the
The new unit of measure will be displayed for three
seconds.
Alternately, when the bottom section of the display
is indicating depth, press and hold the
three seconds. The new unit of measure will be
displayed for three seconds.
Depth units can be selected in the following order;
meters, feet and fathoms.
TEMPERATURE
SPEED
TEMPERATURE
TRIP DISTANCE
TEMPERATURE
TOTAL DISTANCE
TEMPERATURE
DEPTH
key for three seconds.
key for
MD150 User Manual