Table of Contents
Advertisement
Select your computer or other
Press this key repeatedly to select
,
EXT2, EXT3
FRONT, VGA
according to where you connected your
peripherals (see p. 24).
Remark: in
mode only some keys are valid.
VGA
See
Menus and on screen information will disappear
M
Press this key repeatedly to indicate the
peripheral equipment you want to operate
with the remote control.
TV
Press this key to use the remote control
directly in the TV mode
b
Dual screen see p. 17
Press this key repeatedly to select another
picture format: 4:3, Movie Expand 14:9,
Movie Expand 16:9 with or without subtitling,
Super Wide,Wide Screen or Auto Format
(when Auto Format is set to Yes in the
Auto Format makes the picture to fill the
screen as much as possible.
Super Wide removes the black bars on the
side of 4:3 programmes without causing
When in Movie Expand 14:9 or 16:9 picture
format, you can make subtitles visible with
Sometimes also video recorder programmes
carry special signals which will automatically
switch the TV to the correct screen format.
Note: In VGA mode press the
between a 4:3, a 16:9 or a Wide VGA picture
In Dual screen mode press the
between a full or a squeezed picture format.
Bilingual choice and
sound mode selection
• to switch from
Stereo
case of stereo transmission, or from
to
Digital Sound
Digital Sound Available
in case of digital transmission;
• to choose between language
language
(Dual
transmission.The setting is separately
stored for each TV channel.
Use of the remote control
10
Operation
Use of the remote control
peripherals
EXT1,
or
,
TV channels
menu, p. 24.
VGA
if you select
.
VGA
Mode selection
TV operation
Picture format
menu).
SETUP
apparent distortion.
the cursor up/down.
key to switch
format.
key to switch
Press this key
to
sound, in
Mono
,
(Dual ) or
), in case of bilingual
TV
VCR 1
TUNER
VCR 2
TAPE
DVD
SAT
M
AMP
CD
TV
b
OK
P
1
2
3
4
5
6
7
8
9
0
SMART CONTROLS
PICTURE
SOUND
Standby
The set is switched off and the red indicator
lights up in front of receiver box and the
screen.
To switch the TV on again press the
or press - P + or the digit keys.
Although this set is provided with low power
standby it is still advised to switch off your TV
overnight instead of leaving it on standby.You
save energy.
Volume
Press + or - to adjust the volume.The
volume is adjusted. If you want to store the
volume adjustment in the memory, see the
Features menu, Sound PP store, p. 15 to
store the same volume adjustment for all
the stored TV channels.
P
Programme selection
To browse through the TV channels and
externals activated in the Favourite
Programme menu.
Sound mute
Temporarily interrupt the sound or restore
it.
0/9
Digit keys
To select a TV channel.
For a two digit programme number, enter
the second digit within 2 seconds.
Previous programme
The previously selected TV channel or
external is displayed.
Permanent programme number
Screen information
Press for 3 seconds to activate/de-activate
the continuous display of the programme
number.
Press briefly to display information about the
selected TV channel or external, its name,
the sound mode, picture format settings, the
selected DNR setting and the remaining time
set with the sleeptimer.
key
Advertisement
Table of Contents
