All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips. Published by TA 0260 Service PaCE...
ADJUSTMENT INSTRUCTION 1. Application Object 5. Using method for CA-110 This instruction is for the application to the LCD TV. Use it in case of needing adjustment brightness. 2. Notes COLOR ANALYZER: Center of CA110 Screen (1) This set uses an adapter, so connect the adapter and the Input signal of Video set correctly before adjustment.
Page 4
OPTION OPTION TEXT I/II SA SCART A2 ST TEXT I/II SA SCART A2 ST Data Data...
Page 5
OPTION OPTION TEXT I/II SA SCART A2 ST TEXT I/II SA SCART A2 ST Data Data...
Page 6
OPTION OPTION TEXT I/II SA SCART A2 ST TEXT I/II SA SCART A2 ST Data Data...
Page 7
Table 2. OPTION 2 Function ACMS BBACK LANG DATA Option Code Function Remark Austrailia Without ACMS funtion ACMS With ACMS funtion NORMAL Volume Curve RUSHED Volume Curve Defaut(0) Without Blue Back BBACK With Blue Back English English only LANG English+EU4 English+Other EU English,Farsi FARSI...
Page 8
DATA ACMS BBACK LANG DATA PANEL IIC T INVT MD SA MONO CH+AU Table 3. OPTION 3 Function Option Code Function Remark LOCAL KEY(20A20 MODEL) LOCAL KEY(20LA30 MODEL) Without TURBO SEARCH funtion With TURBO SEARCH funtion LCD PANEL OPTION PANEL Defaut(0) RESERVED Tunning with AFT Voltage...
Page 9
PANEL INVT MD SA MONO CH+AU PANEL INVT MD SA MONO CH+AU IIC T IIC T DATA DATA...
Page 10
PANEL INVT MD SA MONO CH+AU PANEL INVT MD SA MONO CH+AU IIC T IIC T DATA DATA...
Troubleshooting 1. General Features Symptom Cause Check Point No screen Input error of inverter connector 1) Bend the pin legs of P802B connector -> recheck them 2) Check and repair the IC806,807 SI4925,IC801 SI786,IC803 SI4808. P502 and Pin 21 connector 1) Check and fix P503B connector being slipped out 2) Check and fix the components at P502 LCD module...
REPLACEMENT PARTS LIST For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
Page 16
For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
Page 17
For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
Page 18
For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible LOCA.
Need help?
Do you have a question about the 20PF9925/12S and is the answer not in the manual?
Questions and answers