Radio Operations; Tuning To Radio Stations; Changing Tuning Grid - Philips HTS3265 User Manual

Before you start .....
Ensure that FM antenna is connected to
the main unit. (For some models, it has
been connected in the factory.) Extend
the FM antenna and fi x its ends to the
wall.
FM
antenna
Helpful Hints:
– For better FM stereo reception, connect an
external FM antenna (not supplied.)
– Position the antenna as far away as
possible from your TV, VCR or other
radiation source to prevent any unwanted
interference.

Radio Operations

Tuning to radio stations

A
Press SOURCE repeatedly until 'FM'
appears on the display panel (or press
RADIO on the remote control).
B
Press / on the remote control to
start tuning.
The frequency indication starts to
change until a radio station with suffi cient
signal strength is found.
C
B
Repeat step if necessary until you fi nd
the desired radio station
D
To fi ne-tune the reception of a weak
station, press /
repeatedly until an optimal reception is
found.

Changing tuning grid

(only applicable for certain regions)
In some countries, the frequency step
between adjacent channels in the FM band
is 50kHz / 100kHz.
Note:
Changing the tuning grid erases all
previously stored preset radio stations.
A
Press SOURCE repeatedly until 'FM'
appears
B
Press x.
C
Press and hold u until 'GRID 9' or
'GRID 10' appears.
briefl y and
43