Connection Options; Remote Control - Haier HL Series Owner's Manual

Introduction

Connection Options

Back panel connections
ATN IN R-AUDIO-L
P r
Antenna Connect cable or antenna signals to the TV,
1
Input either directly or through your cable box.
When using a DVI to HDMI adapter, connect the
2
DVI Audio In
audio signal to these jacks.
Connect the audio L/R cables from the video
3
AUDIO In
signal source to these jacks.
Connect the S-Video cable from an external
4
S-VIDEO In
signal source to this jacks.
Connect the audio L/R cables from the video
5
AUDIO In
signal source to these jacks.

Remote Control

Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two 7# (AAA) alkaline batteries in the
compartment, (plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
EN-5 TV LCD-TFT Owner's Manual
S-VIDEO IN R-AUDIO IN-L
P b Y
COMPONENT IN
VIDEO U S B VGA IN
Connect the video signal from a video device to
6 VIDEO In
this jack.
Connect a USB flash drive to view JPEG images or
7 USB input
listen to MP3 songs.
Connect a video cable from a computer to this
8 VGA Video In
jack.
Connect the audio L/R cables from a computer to
VGA Audio
9
this jack.
In
Connect a HDMI device to receive digital audio and
0 HDMI In
uncompressed digital video.
Component
A
Connect a component video device to these jacks.
Input
PC AUDIO IN H D M I